Product categories
- MA series PID intelligent controller
- MY series PID intelligent temperature controller
- W series economic SCR power regulator
- DF series intelligent SCR power regulator
- DS series universal SCR power regulator
- HY500 series converter
- Temperature sensor
- Pressure transmitter
- Flow meter
- Level gauge
- System integrated control cabinet
Contact us
Taiwan haoyi technology co. LTD
Contact person: manager wei
Telephone: 0571-88681800
Mobile phone: 18969093218
Fax: 0571-86167336
E-mail: 15413574 @qq.com
Website: www.dofonics.com
Company address: 3 / f, no. 6, kanghui road, shugongqu district, hangzhou
压力变送器
AC-P2-2GX digital display industrial pressure transmitter
1. Product overview:
The ac-p2-2gx diffused silicon pressure transmitter USES a high performance induction chip, which is combined with advanced circuit processing and temperature compensation technology to convert pressure changes into linear current or voltage signals. Smaller size, easier to install in limited space. With stainless steel integrated structure, the outer shell is isolated and corrosion resistant. It is suitable for measuring gas and liquid which are compatible with the contact part of materials. It can be used to measure gauge pressure, negative pressure and absolute pressure.
2. Application:
This product is widely used in vehicles, engines, machinery, complete sets of equipment of form a complete set of installation, as well as the typical application in the water, oil refineries, sewage treatment plant, building materials, light industry, machinery industry, realize measurement of liquid, gas, steam pressure.
3. Product features:
316L stainless steel isolated diaphragm structure, high precision, all stainless steel structure miniature amplifier, voltage and current signal output, strong anti-interference, good long-term stability, diversified appearance structure
4. Technical parameters:
conventional |
Number of values |
For note |
||
Pressure range |
In 0.1 MPa -... All pressure ranges between 100.0MPa |
1MPa≈145PSI |
||
Pressure overload |
2 times rated pressure |
|
||
Destroy the pressure |
4 times rated pressure |
|
||
Fine degree of |
±0.10%F.S,±0.25%F.S,±0.5%F.S |
|
||
Stability in sex |
Typical values0.25%F.S, The maximum:0.4%F.S |
|
||
The use of temperature |
-40℃~85℃ |
|
||
Compensation temperature |
-10℃~70℃ |
|
||
Compatible with medium |
All corrosive media compatible with 1Cr18Ni9Ti |
|
||
Electrical performance |
The second line |
Three lines |
Four wire |
|
The output signal |
4~20mA |
0~20mA |
0~20mA |
Can also be0~10mA |
0~10Vdc |
0~10Vdc |
Can also be0~5Vdc |
||
Power supply |
12~30Vdc |
12~30Vdc |
12~30Vdc |
Vdc/acFor both ac and dc |
Load resistance |
(U-10)/0.02(Ω) |
Current mode:(U-12)/0.02(Ω);Voltage type:>100K Ω |
|
|
No margin |
>100M Ω@50V |
|
||
Electrical connection |
Connect to the plug-in DIN43650, shell protection IP65 |
Its called the hersman plug |
||
|
Aviation plug gx16-7, case protection IP65 |
Commonly known as quick plug |
||
|
Waterproof out line (grade 5 waterproof seal), case protection IP68 |
|
||
Pressure interface |
M20×1.5,G1/2,G1/4,NPT1/2,NPT1/4 |
|
||
The response time |
10ms |
|
||
The pressure form |
Pressure G, seal pressure S |
|
5.The product selection
AC-P2-2GX |
Diffused silicon pressure transmitter |
|||||
|
Code name |
Pressure type |
||||
|
G |
Table pressure (optional) |
||||
|
A |
Absolute pressure |
||||
|
Amount of routine |
Measuring range |
||||
|
( 0~ XKpaorMpa) |
|||||
|
Generation of no. |
Integrated accuracy (linear + repeatability + delay) |
||||
|
1 |
±0.5%FS |
||||
|
2 |
±0.25%FS |
||||
|
3 |
±0.1%FS |
||||
|
Generation of no. |
Signal output |
||||
|
A1 |
0-10MA |
||||
|
A2 |
4~20mA |
||||
|
V1 |
0~5V DC |
||||
|
V2 |
0.5~4.5V DC |
||||
|
V3 |
1~5V DC |
||||
|
V3 |
0~10V DC |
||||
|
Generation of no. |
Additional features |
||||
|
F1 |
M20x1.5 External thread |
||||
|
F2 |
G1/4External thread |
||||
|
Fx |
Other threads |
||||
|
L1 |
Pointer table (0~100%) display |
||||
|
L2 |
31/2LCD According to |
||||
|
L3 |
31/2LED According to |
||||
|
P |
Flush type membrane |
||||
|
E |
Ben an explosion-proof type Ex iaIICT5 |
||||
|
C1 |
Direct line |
||||
|
C2 |
Haltzman |
||||
|
C3 |
The aviation plug |
||||
AC-P2-2GX(0~100KPa) -1 -A1 -F1 -L2 - C2 Pressure transmitter |
Type selection tips:
1. The media under test shall be compatible with the materials in contact with the product.
2. The optional additional function code is "E". The explosion-proof Ex iaIICT5 of this type must be powered by the safety grid.
3. For other special requirements, please contact us and indicate them in the order.